mailto:customersupport@plumbingmall.com

Pex Tubing
Long-Lasting and Proven Performance

Used in residential plumbing and radiant systems for more than 25 years, It has a proven performance record and is growing in popularity within the North American plumbing and radiant heating markets. CANPEX™ ULTRA is a multi-layer PEX product which has proven documented performance in chlorinated, potable water systems after extended UV exposure.

Its unique multi-layer design provides the durability, and performance characteristics, to ensure our CANPEX ULTRA has a longer more dependable service life for the end user. CANPEX ULTRA has proven to be superior in performance, in even the most stringent chlorine-resistance testing standards performed on PEX tubing. All chlorine-resistance testing has also been in conformance with ASTM test method F 2023.

Seymour supports NSF’s voluntary P-171 tough pass/fail definitions, including a large design factor for continuous recirculation applications, because future water conditions and other environmental factors may present a significant risk to a plumbing system in the future. PEX producers have no assurance that normal chlorine levels seen today (generally less than 2 ppm but occasionally up to 5 ppm) will be the same 10 to 20 years from now.

Virtually all of the manufacturers who have touted “UV resistance” in their PEX products have been unable to obtain the prestigious chlorine-resistance recirculation rating as well as the six month extended UV protection listing of PEX 5306. This alone makes their products inferior to CANPEX ULTRA. In fact, most manufacturers have met only the minimum chlorine-resistance requirement with the newly incorporated ASTM F876.

CANPEX ULTRA combines added UV and chlorine protection with all of the same features installers look for in a PEX tubing product including:
Faster, easier and more economical installation
Flexibility to reduce the number of fittings required in the system
Ability to use traditional tools and fittings used in standard PEX installations
Corrosion and freeze damage resistance
Scaling and pitting resistance
Safe, chemical-free installation
Proven and reliable brass and Poly-Alloy insert fittings to complete the system
It is recommended outside exposure not exceed 60 days. However, based on testing at independent laboratories, even after six months of exposure CANPEX ULTRA retains its chlorine-resistance properties in hot water recirculating systems.

All CANPEX ULTRA tubing is produced in Copper Tube Sizes from 3/8" to 1" in diameter and has a 100 psi pressure rating at 180°F and 160 psi rating at 73°F. It’s classified as SDR-9 and is ideal for both plumbing and hydronic radiant heating applications.

Seymour’s tradition of stringent research and testing at extreme pressures, temperatures and water quality conditions – in-house and at independent labs – is responsible for developing a product the marketplace needs and can depend upon. CANPEX ULTRA exceeds the performance and service life of any competitive PEX product in the US and Canadian markets today.

 Pex Tubing for Plumbing
Pex Tubing

Pex Tubing 3/8" CTS ,SDR9, 20' Stick

SKU: VANPX2L20

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

20' $4.37

(Plus Shipping)


Price:  $4.37
Color:  
Quantity:  

 
Pex Tubing

Pex Tubing 3/8" CTS ,SDR9, 100' Coil

SKU: VANPX2C1

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

100' $21.82

(Plus Shipping)


Price:  $21.82
Color:  
Quantity:  

 
Pex Tubing

Pex Tubing 3/8" CTS ,SDR9, 500' Coil

SKU: VANPX2C5

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

500' $109.14

(Plus Shipping)


Price:  $109.14
Color:  
Quantity:  

 

Pex Tubing 3/8" CTS ,SDR9, 1000' Coil

SKU: VANPX2C10

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

1000' $218.27

(Plus Shipping)


Price:  $218.27
Color:  
Quantity:  

 
Canpex

Pex Tubing 1/2" CTS ,SDR9, 20' Stick

SKU: VANPX3L20

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

20' $4.95

(Plus Shipping)


Price:  $4.95
Color:  
Quantity:  

 

Pex Tubing 1/2" CTS ,SDR9, 100' Coil

SKU: VANPX3C1

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

100' $24.76

(Plus Shipping)


Price:  $24.76
Color:  
Quantity:  

 

Pex Tubing 1/2" CTS ,SDR9, 300' Spool

SKU: VANPXM3

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

300' $77.24

(Plus Shipping)


Price:  $77.24
Color:  
Quantity:  

 

Pex Tubing 1/2" CTS ,SDR9, 500' Coil

SKU: VANPX3C5

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

500' $123.78

(Plus Shipping)


Price:  $123.78
Color:  
Quantity:  

 

Pex Tubing 1/2" CTS ,SDR9, 1000' Coil

SKU: VANPX3C10

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

1000' $247.56

(Plus Shipping)


Price:  $247.56
Color:  
Quantity:  

 

Pex Tubing 3/4" CTS ,SDR9, 20' Stick

SKU: VANPX4L20

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

20' $8.99

(Plus Shipping)


Price:  $8.99
Color:  
Quantity:  

 

Pex Tubing 3/4" CTS ,SDR9, 100' Coil

SKU: VANPX4C1

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

100' $44.96

(Plus Shipping)


Price:  $44.96
Color:  
Quantity:  

     

Pex Tubing 3/4" CTS ,SDR9, 300' Coil

SKU: VANPX4C3

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

300' $134.86

(Plus Shipping)


Price:  $134.86
Color:  
Quantity:  

 

Pex Tubing 3/4" CTS ,SDR9, 500' Coil

SKU: VANPX4C5

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

500' $224.77

(Plus Shipping)


Price:  $224.77
Color:  
Quantity:  

 

Pex Tubing 3/4" CTS ,SDR9, 1000' Coil

SKU: VANPX4C10

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

1000' $449.55

(Plus Shipping)


Price:  $449.55
Color:  
Quantity:  

     

Pex Tubing 1" CTS ,SDR9, 20' Stick

SKU: VANPX5L20

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

20' $15.64

(Plus Shipping)


Price:  $15.64
Color:  
Quantity:  

 

Pex Tubing 1" CTS ,SDR9, 100' Coil

SKU: VANPX5C1

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

100' $78.18

(Plus Shipping)


Price:  $78.18
Color:  
Quantity:  

 

Pex Tubing 1" CTS ,SDR9, 500' Coil

SKU: VANPX5C5

PEX Tubing is manufactured to ASTM F876/F877 standards and listed to ANSI/NSF Standards 14 and 61. It is chlorine resistance rated for both traditional (CL-TD) and continuous recirculation (CL-R) applications. PEX Tubing is rated at 100 psi and 180 degrees F and 160 psi at 73 degrees F and is available in red, blue, and white.

 

Our Price

500' $390.91

(Plus Shipping)


Price:  $390.91
Color:  
Quantity:  

 Pex Tubing for Heating
Oxygen Barrier Tubing

Oxygen Barrier Pex Tubing 1/2" CTS ,SDR9, 300' Coil

SKU: VANPXOB3C3

CANPEX™ OXY Barrier tubing is ideally suited for HRH applications. Its light weight and flexibility make installation of hydronic heat exchanger loops fast and easy. Oxygen barrier tubing is used for hydronic applications where the total amount of oxygen ingress into the system must be limited. Its versatile design provides a solution for every project.

Used in both residential and commercial construction projects, radiant heating systems can be used as either a primary or secondary heating source for floor warming or as a snow or ice-melt system.

For in-slab systems, CANPEX OXY tubing is simply attached directly to the reinforcement mesh. For under-floor (staple-up) and above-floor (suspended floor with or without poured topping) the tubing is attached to the flooring with tubing clamps or heat transfer plates.

CANPEX OXY tubing is manufactured to nationally recognized industry standards: ASTM F876 and F877. In the event the user wants to use some of the oxygen barrier pipe in a potable water system, CANPEX OXY Barrier is approved for conveyance of potable water.

CANPEX OXY is available in 3/8", 1/2", 5/8", 3/4" and 1" sizes. Common tubing sizes are 1/2" for residential applications and 3/4" for commercial and snow-melt systems. Supply/return transfer lines use the 3/4" and 1" sizes.

CANPEX OXY Hydronic Radiant Heating tubing is warranted for 25 years, from the date of installation. You can be assured of the durability and reliability of tubing components in your hydronic radiant applications.

 

Our Price

300' $103.35

(Plus Shipping)


Price:  $103.35
Quantity:  

 
Oxygen Barrier Pex

Oxygen Barrier Pex Tubing 1/2" CTS ,SDR9, 500' Coil

SKU: VANPXOB3C5

CANPEX™ OXY Barrier tubing is ideally suited for HRH applications. Its light weight and flexibility make installation of hydronic heat exchanger loops fast and easy. Oxygen barrier tubing is used for hydronic applications where the total amount of oxygen ingress into the system must be limited. Its versatile design provides a solution for every project.

Used in both residential and commercial construction projects, radiant heating systems can be used as either a primary or secondary heating source for floor warming or as a snow or ice-melt system.

For in-slab systems, CANPEX OXY tubing is simply attached directly to the reinforcement mesh. For under-floor (staple-up) and above-floor (suspended floor with or without poured topping) the tubing is attached to the flooring with tubing clamps or heat transfer plates.

CANPEX OXY tubing is manufactured to nationally recognized industry standards: ASTM F876 and F877. In the event the user wants to use some of the oxygen barrier pipe in a potable water system, CANPEX OXY Barrier is approved for conveyance of potable water.

CANPEX OXY is available in 3/8", 1/2", 5/8", 3/4" and 1" sizes. Common tubing sizes are 1/2" for residential applications and 3/4" for commercial and snow-melt systems. Supply/return transfer lines use the 3/4" and 1" sizes.

CANPEX OXY Hydronic Radiant Heating tubing is warranted for 25 years, from the date of installation. You can be assured of the durability and reliability of tubing components in your hydronic radiant applications.

 

Our Price

500' $172.23

(Plus Shipping)


Price:  $172.23
Quantity:  

 
Oxygen Barrier

Oxygen Barrier Pex Tubing 1/2" CTS ,SDR9, 1000' Coil

SKU: VANPXOB3C10

CANPEX™ OXY Barrier tubing is ideally suited for HRH applications. Its light weight and flexibility make installation of hydronic heat exchanger loops fast and easy. Oxygen barrier tubing is used for hydronic applications where the total amount of oxygen ingress into the system must be limited. Its versatile design provides a solution for every project.

Used in both residential and commercial construction projects, radiant heating systems can be used as either a primary or secondary heating source for floor warming or as a snow or ice-melt system.

For in-slab systems, CANPEX OXY tubing is simply attached directly to the reinforcement mesh. For under-floor (staple-up) and above-floor (suspended floor with or without poured topping) the tubing is attached to the flooring with tubing clamps or heat transfer plates.

CANPEX OXY tubing is manufactured to nationally recognized industry standards: ASTM F876 and F877. In the event the user wants to use some of the oxygen barrier pipe in a potable water system, CANPEX OXY Barrier is approved for conveyance of potable water.

CANPEX OXY is available in 3/8", 1/2", 5/8", 3/4" and 1" sizes. Common tubing sizes are 1/2" for residential applications and 3/4" for commercial and snow-melt systems. Supply/return transfer lines use the 3/4" and 1" sizes.

CANPEX OXY Hydronic Radiant Heating tubing is warranted for 25 years, from the date of installation. You can be assured of the durability and reliability of tubing components in your hydronic radiant applications.

 

Our Price

1000' $344.52

(Plus Shipping)


Price:  $344.52
Quantity:  

Pex Tubing Questions Call: 1-888-595-1122

SiteLock